Startechcom PEX2PCI4 User Manual download pdf (Page 5)

Instruction Manual

IInnssttaallllaattiioonn

WARNING: PEX2PCI4 uses a DVI interface to connect the the PCI Express

and PCI components. When connecting the PCI expansion board to the PCI

Express card, please ensure that the DVI port provided by PEX2PCI4 is not

confused with a DVI port provided by the computer video card, as this could

damage the video card, as well as the PCI Express expansion card and PCI

expansion slot board.

1. Turn OFF the computer power before installation.

2. Remove the chassis cover from your computer.

3. Locate an unused PCI Express slot and remove the corresponding slot cover from

rear panel of the computer chassis. Retain the screw (if applicable) used to hold the

slot cover in place.

4. Align the PCI Express card with the unused PCI Express expansion slot. Applying

pressure evenly across the top edge of the expansion card, firmly but gently insert the

card into the slot, ensuring that the card is properly aligned with the rear panel slot.

5. Secure the card to the motherboard and rear chassis, using the screw removed in

step 3.

6. Replace the chassis cover (removed in step 2).

Installing the PCI Express expansion card

PCI Express Host Card (Installed in

computer

Power connection

to Expansion Bay

DVI connection

from host computer

to Expansion Bay

1 2 3 4 5 6 7 8 9 10

No comments

Startechcom PEX2PCI4 User Manual Page 5