
Manual Revision: 02/27/2014For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&
Instruction Manual89. Install the Latch (T) into the hole on the Front Door (X).NOTE: The Front Door can be installed to open in either direction bas
Instruction Manual910.Use 2-M4x12 Wood Screws (M) to attach the Strike Plate (S) to the far Side Panel from where the door will hinge. Pull the spring
Instruction Manual10SpecicationsRack Type 4-PostU Height 12UFrame Type Enclosed CabinetMounting Options Front Mount (Front and Rear)Front Door Type W
Instruction Manual11Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solut
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part you need.
Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Instruction Manual1Table of ContentsIntroduction ... 2Packagi
Instruction Manual2IntroductionPackaging ContentsA (1)Left Side PanelB (1)Right Side PanelC (1)Rack TopD (1)Rack BottomE (4)Rack RailF (2)Front/Rear S
Instruction Manual3InstallationTools Required: 1. Use 16-M6x12 (J) Hex Washer Screws to secure the 4 Rack Rails (E) & 4 Panel Brackets (W) to the
Instruction Manual43. Install 6 Cams (P) into the holes on the Rack Top (C) and Rack Bottom (D) panels. Then press 4 Dowel Pins (R) each (12 total) i
Instruction Manual54. Drop Rack Top (C), Rack Bottom (D) and Rront/Rear Support (F) panels onto the Side Panel with Cams (P) engaging with connecting
Instruction Manual65. (Optional) Use 16-M6x12 Hex Washer Screws (J) to secure 4 Casters (V) to the Rack Bottom.
Instruction Manual76. Use 8-M5x12 Truss Screws (K) to secure the Ventilation Panel (G) and the Cable Entry Panel (H) to the two Side Panels.7. Insta
Comments to this Manuals